BBBAccredited Business
Carpentry is the trade where the gap between good and adequate is visible from across the room. A miter that opens up in winter, a panel line that drifts off level, a wall that is square on paper and not in the room.
Carpentry is the trade where the gap between good and adequate is visible from across the room. A miter that opens up in winter, a panel line that drifts off level, a wall that is square on paper and not in the room. Our carpenters cut, fit, and fasten so the work still looks right in five years.
Professional Solutions
Almost no house is truly square, level, or plumb, and that is the whole problem carpentry has to solve. Trim cut to the number on the tape will show a gap at the wall; trim scribed and coped to the surface that is actually there will not. The same is true one layer down, where a partition wall built without checking the ceiling line telegraphs through every piece of finish work that follows. Kaminskiy Care and Repair handles both ends of that range, from crown molding and wainscoting to framing, wall construction, and structural carpentry, with crews across the United States.
The most important thing about aging in place modifications is that they actually hold when they are needed. A grab bar that pulls out of a wall when a person reaches for it during a fall is worse than no grab bar, it creates false confidence and then fails in the exact moment it matters. Every modification we install is backed into framing or blocking, fastened to specification, and load-tested before we leave.
Inside corners are coped so seasonal movement closes the joint instead of opening it. A mitered inside corner is the reason most crown shows a crack by the second winter.
We fit to the surface in front of us, not to the dimension on the plan, so panels and casings sit tight against walls and floors that are not perfectly true.
Trim, panels, and built-ins are located to studs and blocking. Anything carrying weight gets backing added before it goes up, not drywall anchors after.
We stand behind our carpentry workmanship across every service on this page.
Choose Kaminskiy for seamless patches, straight lines, and finishes that blend perfectly. We’re not just covering damage, we’re restoring the smooth, durable surfaces your rooms deserve.
BEFORE
AFTERCrown is the least forgiving trim in the house because it meets two surfaces at an angle and every wall it crosses is a little different. Corners get coped, long walls get a scarf joint over a stud, and the whole run is caulked and finished so it reads as one continuous line.
Panel work is layout work. Frames have to be spaced so the pattern lands evenly at both ends of the wall and steps correctly around doors, outlets, and returns. We draw the layout on the wall before a single piece is cut.
Casing hides the gap between the window unit and the framing, which means it also hides whether that gap was ever insulated and sealed. We check behind the old trim before the new trim goes on, because a draft is cheaper to fix while the wall is open.
Building something new, indoors or out, where the structure has to carry a real load. Stairs, decks, pergolas, closets, and built-ins are all layout-and-load problems before they are finish problems, and getting the first part wrong cannot be sanded out later.
Carpentry inside an existing house, where the job is matching what is already there. Profiles that are no longer sold, floors that slope, and additions framed to a different standard all have to be reconciled so the new work does not announce where it starts.
Adding a wall is straightforward. Removing one is not, and the difference is whether it carries load from above. We determine that first, then either build the partition or engineer the opening with a header sized for the span.
Every one of these is a quick fix for a Kaminskiy-certified technician. Call now. Most repairs are finished in one visit, and one visit can cover several small jobs.
We answer in under three rings and get you priced and scheduled in minutes.
A clear, written quote with upfront pricing. You approve before work begins.
Kaminskiy-certified pros finish the job with a workmanship warranty.
Every job is backed in writing by our workmanship warranty and done by a Kaminskiy-certified, background checked technician.
Doors, drywall, fences, decks, paint, fixtures, and the fifty small things in between. The point of a real handyman company is that one call covers the list, one crew shows up, and one standard applies to all of it.
Our technicians are background checked employees in Kaminskiy uniforms, not a rotating cast of subcontractors. That is why the quality is consistent, why the warranty means something, and why we can put our name on the door of the van.
Call, describe the job, and most work is priced and scheduled in under 10 minutes. You get the number in writing before anyone starts, and the price you approve is the price you pay. No hourly meter running in your hallway.
The smartest way to use us is to save the list. Five small jobs in one visit beats five separate service calls in cost and in hassle. Walk the house, write it down, and hand the whole thing to one crew.
Can't find your answer? Call 855-695-1195 and ask us anything.
Call 855-695-1195Interior finish carpentry: baseboards, door and window casing, crown molding, wainscoting and wall panels, built-in shelving, framing for new walls and closets, and repairs to damaged or rotted trim. If it is wood trim or framing inside your home, we likely handle it.
In most homes, yes. We bring a sample or a photo of your profile and match it from stock moldings. Older homes sometimes have profiles that are no longer made. When that happens, we show you the closest match before we cut anything.
We repair whenever the wood is sound. A loose miter, a split piece of casing or a dented baseboard can usually be fixed and blended in. We replace only the pieces that are rotted or too damaged to save.
We set every nail, fill the holes and caulk the joints so the trim is ready for paint. We can paint it too, or leave it primed for your own painter. You choose before we start.
By the job, not by the hour. The price depends on how many feet of trim, the profile you choose and how much prep the walls need. Most jobs are priced on the call or after a quick look, and you get the price in writing before work begins.
Tell us what is on the list. We'll call you back with a price and a time. Calling is still the fastest way: 855-695-1195.
Free quotes. Kaminskiy-certified technicians. A workmanship warranty on every job.
We answer in under three rings, 24/7.No price games. You get a clear written quote before any work begins, backed by our workmanship warranty.
