BBBAccredited Business
A light switch that is cracked, discolored, or stopped working is a small problem with a fast solution. A three-way switch that was never wired correctly or a room that needs an additional switch location is more involved, and still well within the handyman scope when the wiring is accessible.
A light switch that is cracked, discolored, or stopped working is a small problem with a fast solution. A three-way switch that was never wired correctly or a room that needs an additional switch location is more involved, and still well within the handyman scope when the wiring is accessible. Our handyman electrical specialists replace, upgrade, and install light switches correctly and cleanly.
Professional Solutions
Switch replacement seems straightforward but has a few critical details that determine whether the replacement works correctly, particularly on three-way switches, where the traveler wires must be connected to the correct terminals or the switch will not operate as intended from both locations. Kaminskiy Care and Repair’s handyman electrical technicians photograph wiring before disconnecting, replace switches with the correct type for the circuit, and test operation from every switch location before closing the box. With crews across the United States, a properly working switch is a call away.
The most common switch replacement mistake is disconnecting a three-way switch without documenting which wires were on which terminals, a mistake that results in a switch that works from one location but not the other. Our handyman electrical crews photograph and label wiring before disconnecting anything.
We photograph existing wiring before removing any switch so the replacement is wired identically, critical on 3-way and 4-way circuits.
Single-pole, 3-way, and 4-way switches are not interchangeable, we verify the switch type before installation.
Three-way and four-way switch replacements are tested from every switch location before the cover plate is installed.
We stand behind our switch installation and replacement workmanship.
BEFORE
AFTERSingle-pole, 3-way, and 4-way switch replacement, correct type selected, wiring documented before disconnect, and operation tested from all switch locations before cover plate installation.
Updating mismatched, cracked, or builder-grade switch plates throughout a room or home, a fast, impactful improvement that ties a paint or renovation refresh together.
Smart light switches installed in place of standard switches, wired for neutral wire requirements, connected to Wi-Fi or smart home hub, and app-configured for remote and voice control.
One call covers every room.
The chandelier in the box, the dark hallway, the fan that wobbles like a helicopter. We hang fixtures level and secure, balance fans to silent, and wire it all safely. Permit-level panel work goes to licensed electricians we coordinate, honestly.
Every one of these is a quick fix for a Kaminskiy-certified technician. Call now. Most electrical jobs are finished in one visit.
We answer in under three rings and get you priced and scheduled in minutes.
A clear, written quote with upfront pricing. You approve before work begins.
Kaminskiy-certified pros finish the job with a workmanship warranty.
Every job is backed in writing by our workmanship warranty and done by a Kaminskiy-certified, background checked technician.
Device level work is ours: light fixtures, ceiling fans, switches, dimmers, outlets and TV mounting. It is the everyday electrical list, done safely, tested before we leave, and usually finished in one visit.
Panels, new circuits, service upgrades and anything behind the breaker box belong with a licensed electrical contractor. When your job crosses that line we say so on the first call, free, instead of learning it at your house.
A fan is heavier than the light it replaces and it moves. The box in the ceiling must be fan rated, and that check is the difference between a fan that hums along for years and one that wobbles loose. We check it every time, and fix it when it is not.
Warm switch plates, flickering that follows one circuit, and outlets that no longer grip a plug are the house asking for attention. Swapping the worn device is often the whole fix. Ignoring it is how small electrical stories become big ones.
Can't find your answer? Call 855-695-1195 and ask us anything.
Call 855-695-1195Device-level work. Fixtures, fans, outlets, switches, dimmers and troubleshooting, done safely and to code. Panel upgrades and permit-level scopes are coordinated with licensed electricians, honestly and transparently.
Yes. Flickers, trips and dead spots get a methodical diagnosis and a clear explanation, not guesswork.
Happily. We hang the fixture you chose, level, secure and wired correctly.
You get a clear, written quote before any work begins. No surprises. Call and we can usually price your repair over the phone in minutes.
Yes. Every electrical job is backed in writing by our workmanship warranty and done by a Kaminskiy-certified, background checked technician.
Tell us what needs installing or fixing. We'll call you back with a price and a time. Calling is still the fastest way: 855-695-1195.
Free quotes. Kaminskiy-certified technicians. A workmanship warranty on every job.
We answer in under three rings, 24/7.No price games. You get a clear written quote before any work begins, backed by our workmanship warranty.
