BBBAccredited Business
Power washing removes that buildup in a fraction of the time that hand scrubbing would take, and at pressures that clean surfaces without damaging them when the technique is correct. Our specialists power wash exterior surfaces throughout the property with the right pressure and nozzle selection for each surface, so concrete gets concrete pressure, and wood siding gets the lower pressure it needs to clean without raising the grain.
Professional Solutions
Power washing technique matters, the same PSI that cleans a concrete driveway effectively will etch wood decking, raise siding grain, or drive water behind vinyl siding and into the wall assembly if applied incorrectly. Kaminskiy Care and Repair’s power washing specialists select pressure and nozzle for each surface: high-pressure wide-fan nozzles for concrete and masonry, lower-pressure and wider nozzles for wood and painted surfaces, and soft-wash chemical application for roofing and surfaces that should not see pressure at all. Every surface is left clean without damage. With crews across the United States, a professionally washed exterior is a call away.
The most common power washing damage, etched concrete, raised wood grain, and siding that was driven off the wall, all come from using the wrong pressure for the surface. Our power washing specialists match pressure, nozzle, and technique to every surface before starting.
Pressure and nozzle angle are selected for each surface type, concrete handles 2,500–3,000 PSI at a focused nozzle; wood siding needs 600–800 PSI at a wide fan angle to clean without damage.
Roofs, painted wood, and aged surfaces are cleaned with a low-pressure soft-wash application using a cleaning solution rather than high-pressure water, so the surface is sanitized without physical damage.
Oil stains on driveways, algae on north-facing siding, and mold on decks get a pre-treatment application that breaks down the buildup before the pressure wash, so one pass cleans completely.
We stand behind our power washing workmanship.
BEFORE
AFTERConcrete, brick paver, and stone surface washing at pressures appropriate for the material, removing oil stains, tire marks, algae, and ground-in grime from driveways, walkways, patios, and pool decks.
Vinyl, fiber cement, wood, and stucco siding washed at surface-appropriate pressure, removing mold, mildew, algae, and oxidation without driving water behind the siding or damaging the surface finish.
Wood and composite deck washing, fence washing, and roof soft washing, with wood deck washing at the lower pressure that cleans without raising grain, and roof washing as a soft-wash-only service.
The most satisfying before and after in home care.
Concrete holds years of tire marks, oil and gray buildup, and it all comes off with professional pressure and the patience to do even passes. Wood, stucco and siding get gentler treatment, because the goal is clean, not stripped. Knowing the difference is the job.
Every one of these is a quick fix for a Kaminskiy-certified technician. Call now. Most washes are finished in one visit. Bundle it with staining, painting or gutter cleaning.
We answer in under three rings and get you priced and scheduled in minutes.
A clear, written quote with upfront pricing. You approve before work begins.
Kaminskiy-certified pros finish the job with a workmanship warranty.
Every job is backed in writing by our workmanship warranty and done by a Kaminskiy-certified, background checked technician.
Concrete can take real pressure. Wood, stucco and painted surfaces cannot, and the internet is full of fence boards with etch marks to prove it. We match the pressure, the tip and the distance to each surface, which is the entire craft.
Siding, stucco and roofs are cleaned with low pressure and the right cleaning solution, which kills the growth instead of blasting the surface. The result lasts longer and the finish underneath stays intact. Knowing when to soft wash is the difference between clean and damaged.
Washing is not only cosmetic. Algae and grime hold moisture against your paint and finishes, and slick growth on walkways is a genuine slip hazard. A yearly wash is cheap maintenance for paint, decks and curb appeal alike.
If painting or staining is anywhere in the plan, washing comes first. Coatings only bond to clean, dry surfaces. We wash, let it dry properly, and since painting is also our trade, one crew can carry the job straight through.
Can't find your answer? Call 855-695-1195 and ask us anything.
Call 855-695-1195Not when the pressure matches the surface. Concrete takes real pressure. Wood, stucco and siding get soft washing. Using one setting for everything is how amateurs strip paint and etch wood. We are not amateurs.
Where they help, yes, and we choose products safe for plants and pets, rinsed thoroughly. Plain water and pressure handle most concrete.
Most homes look sharp with a wash every year or two. Shaded, damp sides may want it yearly. We will tell you honestly, not sell you a schedule.
You get a clear, written quote before any work begins. No surprises. Call and we can usually price your repair over the phone in minutes.
Yes. Like everything we do, backed in writing by our workmanship warranty.
Tell us which surfaces need cleaning. We'll call you back with a price and a time. Calling is still the fastest way: 855-695-1195.
Free quotes. Kaminskiy-certified technicians. A workmanship warranty on every job.
We answer in under three rings, 24/7.No price games. You get a clear written quote before any work begins, backed by our workmanship warranty.
